Wall-Mounted Rotary Phase Converter
The largest motor the WMA-2 will start is a 10hp / 31.80 amps / 7.453 kw motor or element
A rotary phase converter kit uses an induction generator (sometimes referred to as an idler) to produce 3 phase power. In addition, the 2 single phase lines are used to energize the induction generator; in turn the induction generator produces the 3rd line of power (voltage). Therefore this 3rd line of power is joined together with the single phase lines to make 3 phase power.
The WMA-2 will run a combination of up to 20hp / 62.17 amps / 14.91 kw of machinery at once.
When more than one motor, if the largest sizes occurs more than once, automatically go up to the next size converter.
Have questions? Need clarity? Call us (574) 236-6220
DID YOU KNOW?
Since 1960, Phasemaster® has been America's legendary phase converter brand.
Our stated horsepowers are actual, no need to cut the number in half, or double them. Further, to know the total hp of multiple motors, you multiple by 2. So, do NOT be fooled by low prices elsewhere.
Voltage Balance of +/- 2 - 5 % based on the input, need tighter metrics.
WMA-2 Phasemaster® 10 horsepower start. Any questions?
You can download the specification sheet on here, but, if you still have questions, we are here to help.
Call us today at (574) 236-6220
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
LSV | Load Sensing Voltage Regulator |
A | Automatic Controls |
A-LSV | Both Automatic Controls and Load Sensing Voltage Regulations |
Standard | No add-ons |
The controller is adjusted at the factory but may require additional fine adjustment to function properly in various loads and input voltage conditions.
Reviews
There are no reviews yet.